Makerspaces don't have to be dangerous. But, by their very nature, there are a lot of hazardous tools, sharp equipment, and potential trip hazards around the room. This is just as true in a community-hosted makerspace as in a STEM classroom. While you can't remove every potential danger without completely emptying out the room, you can design the space to remove one of the most prevalent tripping hazards: power cords.
Here are three tools that can help your makerspace be as cord-free as possible:
Interchange Engage Multimedia Table w/ 8 Power Ports by Smith System[/caption]
Instead, look for secure tables with electric modules built right into the top of the table's surface. Most table power modules allow mutliple users to charge at once, reducing redundant cords running to the wall outlet. The fewer cords that are touching the floor, the better.
iTeach Electric Adjustable Flat Panel Wall Mount by Mooreco
Opt for wall-mounted television brackets and ceiling-mounted projectors if you need presentation tech in the makerspace design room. Not only does that get rid of the power cords and save available sockets, but it also saves you walking and storage space, too.
Tablet & Chromebook Charging Stations by Luxor
Find the right charging cart for your classroom's devices and storage needs. But charging laptops, power tools, and the rest of your equipment whenever it's not in use is a great policy. Mobile power towers are also great to centralize your power hub. Add a rechargeable power tower in the center of your soft seating area for portable devices being used in your makerspace. Browse our selection at Worthington Direct for makerspace furniture and storage solutions that can help.
Multimedia Tables with On-Table Sockets
If you remember any well-designed garages or workspaces from ten or twenty years ago, they were filled with sockets built into the floor. Instead of having to arrange electronics or electrically-powered tools close to the walls, they could be arranged throughout the room. But even then the cords presented a large liability. Interchange Engage Multimedia Table w/ 8 Power Ports by Smith System[/caption]
Instead, look for secure tables with electric modules built right into the top of the table's surface. Most table power modules allow mutliple users to charge at once, reducing redundant cords running to the wall outlet. The fewer cords that are touching the floor, the better.
Wall-Mounted Technology
Free up precious floor space and keep your area looking neat and organized with a sleek, modern TV mount. Wall-mounted TV mounts make every presentation pop, with adjustable height and angle options for the best view so all attendees can see. They add a sleek, modern touch to any office, impressing everyone who walks in. Plus, they keep your screens safe and secure, out of harm's way. iTeach Electric Adjustable Flat Panel Wall Mount by MoorecoOpt for wall-mounted television brackets and ceiling-mounted projectors if you need presentation tech in the makerspace design room. Not only does that get rid of the power cords and save available sockets, but it also saves you walking and storage space, too.
Charge Carts
If the tools and computers are charged, then the power cords don't need to be out on the floor in the first place. Look for storage solutions that encourage charging when the equipment isn't in use. You may have to appoint someone to check that everything's plugged in when a lesson or session is over. Tablet & Chromebook Charging Stations by LuxorFind the right charging cart for your classroom's devices and storage needs. But charging laptops, power tools, and the rest of your equipment whenever it's not in use is a great policy. Mobile power towers are also great to centralize your power hub. Add a rechargeable power tower in the center of your soft seating area for portable devices being used in your makerspace. Browse our selection at Worthington Direct for makerspace furniture and storage solutions that can help.
